deflexion

英

美

n.  偏斜，偏转

英英释义

noun

• a turning aside (of your course or attention or concern)
  1. a diversion from the main highway
  2. a digression into irrelevant details
  3. a deflection from his goal
  Synonym:diversiondeviationdigressiondeflectiondivagation
• the property of being bent or deflected
  Synonym:deflectionbending
• the movement of the pointer or pen of a measuring instrument from its zero position
  Synonym:deflection
• the amount by which a propagating wave is bent
  Synonym:deflectionrefraction

双语例句

• We gather a set of economically feasible technical criteria on linearity 、 squareness 、 deflexion 、 pitch and oscillation of sliding guide etc, and make the survey accuracy of the machine tool hit 63.2 μ m, and meet accuracy requirement.
  在各导轨的直线度、垂直度、导轨运动时的偏转、俯仰、摆动等方面得出了一组经济可行的技术指标，使机床的测量误差小于63.2μm，满足了精度要求。
• For example, how to match the CVT with dynamic system? How much key structure factors are there in CVT and how to define them? The belt will deflect while CVT is working. How to increase the life of the belt according to deflexion?
  例如：CVT系统与动力系统如何匹配？CVT系统的关键结构参数有那些，如何确定？CVT系统工作过程中皮带产生偏斜，如何控制偏斜以增加皮带的使用寿命等。
• In production, analyze how the modify of the thickness of its main, subsidiary angle iron influences the whole steel column ′ s deflexion with this arithmetic also, and here by control the weight of the materials and make its shape size measure up to the standard.
  在生产中用该算法也可以分析钢柱主、副角钢厚度变化对整个钢柱挠度的影响，从而要求在生产中应严格控制原材料的质量，使其外形尺寸必须符合标准要求。
• The anisotropy associated with the earth's rotation results in a slight deflexion of the ray paths. Analysis of the Cutoff Frequency of Ridged Waveguides Partially Filled with Dielectric by Non-uniform FDTD
  与地转有关的不均匀性会导致波向线产生轻微的偏转。用非均匀网格FDTD法计算部分介质填充脊波导的截止频率
• There are two main transferring ways of controlling Laser beam in space: acousto-optic deflexion and mechanism deflexion, the driving system of acousto-optic deflexion is complex and the dispersion is serious.
  控制激光束在空间上改变的方式主要有声光偏转和机械偏转，声光偏转的驱动系统复杂，色散严重；
• It is suggested that fibre pulling out and interbedded crack deflexion are the major toughing mechanism in the asymmetrical FGM.
  HA（ZrO2）-316L不锈钢纤维FGM中，分析认为，增韧机理主要为纤维拔出增韧和层间裂纹偏转增韧。
• On the base of the model of residual stress, the stress state between matrix and crystal was analyzed. With the introduction to the theory of crack deflexion, the effect of different aspect ratios of crystals on toughen was discussed.
  以残余应力模型分析基体和颗粒间的应力状态，应用裂纹偏转理论，讨论不同长径比晶粒的增韧效果。
• The flow field of cutting comminution is simulated and analysed by computational fluid dynamics software FLUENT. From which we received the impeller form and deflexion angle of blade most in favor of cutting comminution, and proved that the high-speed cutting comminution have a economic rotational speed.
  利用流体分析软件FLUENT对切割粉碎流场建模，并在进行数值分析后，得到了最有利于切割粉碎的叶轮形式、刀片偏角，提出了高速切割粉碎设备粉碎物料存在一个经济转速。
• The stress expression of the whisker tip was got on the basis of modifying the shear lag theory. The expression to forecast the corporate toughening effect of whisker bridging, whisker evulsion and crackle deflexion was derived.
  对剪滞理论进行了修正，得出了晶须端部所受应力的表达式，推导出了预报晶须桥联、晶须拔出、裂纹偏转三者协同增韧效果的表达式。
• The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
  细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。