shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- The design of a vertical die casting machine rotor is most important to improve the quality of the rotor, traditional rotor castings have many shrinkages such as dispersed organization, bad compaction degree, large blowholes.
电机转子立式压铸机压铸模具的设计制造是保证电机转子品质至关重要的环节，传统工艺生产的电机转子铸件存在着组织疏松、密实度差、气孔多而大等缺陷，影响着电机的各种态势性能； - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - On the one hand, casting shrinkages at different positions of the blade are considered as nonlinear thermo-mechanical casting deformations that are calculated with accuracy by finite element analysis.
一方面，基于叶片收缩变形位移场的有限元仿真结果，更为准确地计算铸件不同部位的收缩率； - Discussion on different sintering shrinkages between laminates composed of powders with different granularity
关于不同粒度粉末层间烧结收缩不同步问题的探讨 - The research of early age shrinkages of concrete is very important for the solutions of early age cracking of concrete engineering, especially for high performance concrete.
研究早龄期收缩对于解决混凝土工程，尤其是高性能混凝土的早期开裂具有重要意义。 - Because 3D surface model contains huge number of triangles, a mesh simplification algorithm based on triangle edges shrinkages is presented in this paper to speed up the rendering in real time.
并对其生成的表面几何模型所包含三角面片数量巨大的问题，提出一种快速有效的三角形边收缩算法进行网格简化，提高了表面模型的绘制速度。 - At a fixed carbonization temperature, the shrinkages of tangential and radial directions were higher than that of axial direction.
在相同炭化温度下，竹材炭化过程中切向和径向的收缩率高于轴向。 - The relationship of relative humidity and autogenous shrinkages of reactive powder concrete ( with compressive strength of 200 MPa) with ages were investigated detailed.
通过试验研究了抗压强度为200MPa的活性粉末混凝土在水化过程中内部相对湿度及其自收缩随龄期的变化规律； - The effects of carbonization temperature and time on shrinkages of PAN-CHF and PAN-ACHF, activation yield, specific surface area and adsorption capacity were investigated.
考察了炭化温度和炭化时间对PAN-CHF的收缩率、PAN-ACHF的收缩率、活化收率、比表面积和吸附性能的影响。 - Abstract: introduced is the experience in replacing atmosperic riser with thermal-isolation riser and improving pouring system to eliminate shrinkages.
文摘：介绍了用保温冒口代替大气压力冒口，改进浇注系统解决铸件缩孔问题的经验。