slenderness

英 [ˈslɛndənəs]

美 [ˈslɛndərnəs]

网络  细长度; 长细比; 纤细; 名词; 细长

BNC.40473 / COCA.40756

英英释义

noun

• the property of an attractively thin person
  Synonym:slightnessslimness
• relatively small dimension through an object as opposed to its length or width
  1. the tenuity of a hair
  2. the thinness of a rope
  Synonym:thinnesstenuity
• the quality of being slight or inadequate
  1. he knew the slenderness of my wallet
  2. the slenderness of the chances that anything would be done
  3. the slenderness of the evidence

双语例句

• Combined with the proportion of length to width of tongue, the automatic quantitative analysis of plumpness and slenderness of tongues is realized.
  该文研究了曲线拟合参数与曲线形状胖瘦的关系，结合舌体的长宽比，实现了舌体胖瘦的自动定量分析。
• Tests show that the strength of column decreases as its slenderness ratio increases.
  试验表明，这种柱子的承载能力随长细比的增大而显著下降。
• According to the relationship between the structural strength and slenderness of plate elements, the limited width-to-thickness ratio of the flange of a box-section column under seismic load is derived.
  由构件承载力与壁板宽厚比的关系，得出了抗震设计箱形截面柱翼缘板宽厚比限值。
• Bearing behavior of cast-in-place piles with similar slenderness ratios in deep soil layer
  深厚土层中长径比相近灌注桩承载性状
• Laws of bearing capacity and mechanical property affected by slenderness ratio and load eccentricity ratio were investigated.
  根据试验结果，总结了长细比、偏心率对试件承载力和力学性能的影响规律。
• But while a new study has confirmed that French women are indeed the slimmest in western Europe, their slenderness, it has found, comes at a cost: they also worry the most about their weight.
  研究发现，法国女性虽然确实在欧洲最为苗条，但这也不是白来的，她们对于自己体重的关注也是欧洲之冠。
• Based on model experiment and simulated experiment, the formula of equivalent slenderness ratio was established.
  在模型试验和仿真试验的基础上，提出了单边连接高强角钢等效长细比公式。
• Value Selection of Slenderness Ratio and Diameter-Thickness Ratio of Steel Tube for 1000 kV Transmission Steel Tubular Tower Legs
  特高压钢管塔主材长细比及径厚比的取值
• The results show that the most remarkable factor is the slenderness ratio, the axial compression ratio takes second place and the steel ratio is third.
  结果表明，对其影响最大的为长细比，其次是轴压比，再次是含钢率。
• According to the slenderness ratio and the maximum windward area, four experiments are designed.
  按不同的长细比和不同的最大迎风面积设计了四个实验。